LAUNCH X431 X-PROG 3 IMMO / Programator de chei / Imobilizator

Descriere în limba engleză

LAUNCH X431 X-PROG 3 Key Programming Immobilizer

Launch X431 X-PROG 3 Vehicle Immobilizer Programmer Key supports EEPROM read and write

X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device that can read/write keys to the vehicle. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables Anti-theft type identification. Remote control matching, Key chip reading & matching, anti-theft password reading and anti-theft component replacement.

LAUNCH X431 XPROG 3 Features:

1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and FOR BMW CAS4+/FEM chips, FOR Mercedes-Benz infrared keys, generating special keys, reading FOR BMW engine INS code.
2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated.
3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc.
4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell

LAUNCH X431 X PROG 3 Advantages:

1. Supports For VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key).
2. Supports For VW/AUDI MQB platform gearbox ECU replacement or cloning.
3. Supports ECU replacement for the fifth-generation of For Audi (0AW/0B5) gearbox.
4. Supports reading, writing & cloning the ECU for the fourth-generation of For VW UDS engine.
5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty.
6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU).

LAUNCH X431 X-PROG 3 Core Functions:

1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc.
2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating.
3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC).
4. Supports ECU replacement for the fourth-generation of For VW/AUDI engine;
5. Supports ECU replacement for the fifth-generation of For VW/AUDI Bosch and Siemens engines.
6. Supports the all lost and replacement for the fourth generation of For AUDI EZS, comfortable ECU, and KESSY IC.
7. Supports the For BMW F and G chassis 8HP gearbox ECU reprogramming to empty.
8. Supports the For BMW CAS4/CAS4+ module replacement.
9. Supports the ECU cloning and replacement for BMW Siemens engines.
10. Erase the password for Mercedes-Benz engine and gearbox within 3S.
11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute.

LAUNCH X431 X prog 3 Compatible with:

X431 Diagun V, X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII

LAUNCH X431 X prog 3 Supports Car List :

For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Bmw, For BriBmw, For Bugatti, For Chang An, For Chevrolet, For Citroen, For Dacia, For Dallara, For Dodge, For Ferrari, For Fiat, For Ford, For Freightliner, For Geely, For GMC, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For JMC, For Kia, For Lamborghini, For Lancia, For Land Rover, For Lincoln, For Mahindra, For Maserati, For McLaren, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Saab, For Seat, For Skoda, For Subaru, For Suzuki, For Toyota, For Vauxhall, For Volkswagen (VW), For Volvo, EEPROM

It supports mainstream manufacturers of common ECU MCUs, with more than 1,000 product models and continuous updates:

• Atmel NSC
• Fujitsu Philips
• Infineon Renesas M16
• MC68HC05 Renesas M32
• MC68HC08 Renesas M32R
• MC68HC11 Renesas R32C
• MC68HC12 Renesas R8C
• MediaTek Renesas V850 SPI
• MicroChip Renesas V850 UART
• Nordic Samsung
• ST SiLabs

It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and is continuously being updated.

• 4Wire GI Numonyx SST
• Adesto GigaDevice OKI ST
• AKM Grundig ONSemi Toshiba
• Altera HOLTEK Other Winbond
• Amic Hynix PCT Xicor
• Atmel I2C Philips xUSSR
• BOSCH ITT Pioneer YMC
• Catalyst KHIC PMC Spansion
• Chingis Macronix Ramtron SPI
• Dallas/Maxim MicroChip Rohm NEC
• EON Micron Samsung NSC
• ESMT MicroWire Seiko Ford
• EXEL Mitsubishi Siemens Fujitsu
• Fairchild Motorola Sony

1. Car key slot: Place the car key to perform the key matching function
2. DB26: Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc.
3. Mercedes-Benz key infrared slot: Place the Mercedes-Benz infrared key to perform the key matching function
4. Car key chip hole: Place the key chip to perform key matching
5. Status indicator: Power indicator
6. DIY slot: Connect the anti-theft ECU pin through the cable to read and write data
7. Locker Install chip burning socket: Complete EEPROM or MCU data read and write operations
8. DC12V power supply: Connect DC12 power supply
9. DB15: Connect the main wiring

How to use X-PROG3 to read and write data?

Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3, with LAUNCH X431 Tablet to do key matching, data reading and writing, etc.

Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host

Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host

LAUNCH X431 x-PROG 3 Specification:

Input Power: DC12V

Working CurrentMax: 500mA

Power Consumption: 5W

Storage Temperature: -20℃~70℃

Working Temperature: 0℃~50℃

LAUNCH X431 X prog 3 Packing List:

– Main unit

– Power adaptor

– Main diagnostic cable

– The fourth-generation data acquisition cable

– The fourth-generation of EEPROM data acquisition cable (without dismantling dashboard)

– BENCH mode cable. MCu converter V1. MCU converter V2

– Mcu cable with multiple leads. EEPROM chip adaptor

– Benz infrared analog acquisition key

– MCU cable with multiple leadsEEPROM converter

– User Manual